Gateway E-5400 Personal Computer User Manual


 
54
System Components
4
Replace the two screws securing the power supply to the back of the
chassis, leaving them slightly loose.
5
Replace the two supporting screws securing the power supply to the top
of the chassis, then tighten all screws.
6
Reconnect the power connectors to the system board and to all internal
devices.
7
Place the case upright, then close the case as described in Chapter 3.
8
Reconnect the power and modem cords, then turn on the system.
05030.book Page 54 Monday, November 22, 1999 8:23 AM