Gateway E-5400 Personal Computer User Manual


 
62
System Components
Control panel
Removing and replacing the control panel
To remove the control panel:
1
Turn off the system and disconnect the power cord and modem cord, if
installed.
2
Open the case by following the instructions on page 17. (See Preventing
static electricity on page 15.)
3
Remove the bezel, as described in To remove the be ze l: on page 19.
4
After noting the position of the cables, disconnect the front panel
connector from J13J2 on the system board.
05030.book Page 62 Monday, November 22, 1999 8:23 AM