Filter
Top Products
Control panel
63
5
Pull out on the retention tab and slide the control panel unit to the left,
then pull it away from the front of the chassis, taking care not to damage
the control panel cables or connectors as you pull them from the chassis.
To install the new control panel:
1
Feed the control panel connector and cables through the opening in the
front of the chassis.
2
Noting the position of the cables, plug the control panel connector into
J13J2 on the system board.
Retention tab (shown
with part of bracket cut
away for clarity)
05030.book Page 63 Monday, November 22, 1999 8:23 AM