60
System Components
5
Carefully remove the fan and bracket from the chassis.
6
Remove the fan from the bracket by carefully prying up on each corner
with a flat-bladed screwdriver.
7
Remove the fan guard by removing the four screws securing it to the fan.
To install the new rear system fan:
1
Install the fan guard on the new fan with the four screws you removed
from the old fan.
2
Place the new fan into the recess in the rear fan bracket and press it firmly
into place. Orient the fan with the fan label toward the rear of the chassis.
05030.book Page 60 Monday, November 22, 1999 8:23 AM