Filter
Top Products
30
Chapter 2: Setting Up
www.gateway.com
Troubleshooting
If the NAS does not boot after you turn it on, check the following factors that
might have caused the boot failure:
■ The external power cable may be loosely connected. Check the power cable
connection from the power source to the power cable connector on the
rear panel. Make sure that the cable is correctly connected to the power
source and to the power cable connector.
■ No power comes from the grounded power outlet. Have an electrician
check your power outlet.
■ Loose or incorrectly connected internal power cables. Ask a qualified
technician to assist you.
■ For more troubleshooting steps, see “Troubleshooting” on page 71.