Filter
Top Products
43
Main menu
www.gateway.com
5 Select DHCP1 On if you want to get an IP address assigned automatically
from the NAS, then press the
Enter button.
- OR -
Select
DHCP1 Off if you want to manually set the IP settings (IP address,
net mask, and gateway IP address), then press the
Enter button.
An asterisk appears next to the DHCP On or DHCP Off option.
6 Select OK, then press the Enter button. The “Wait host respond” message
appears on the LCD screen. After a few seconds, the “Setting OK” message
appears.
Manual
This option lets you manually enter the IP, net mask and gateway IP address
for the LAN1 host.
To configure LAN1 manually:
1 Press the Enter button.
2 Press the Next or Previous button to select Network on the Main menu, then
press the
Enter button.
3 Select LAN 1, then press the Enter button.
4 Select Manual, then press the Enter button.
5 Select IPAddr1, then press the Enter button.
6 Enter the IP address by pressing the Enter button to increase number input.
Press the
Next button to move the cursor to input the remaining numerical
value of the IP address, then press the
Exit button.
(Example) 192.163.001.010
7 Select NetMask1, then press the Enter button.
8 Enter the subnet mask, then press the Exit button to end input.
9 Select GWIP1, then press the Enter button.