Filter
Top Products
40
Chapter 4: Configuring the NAS
www.gateway.com
Overview
The LCD screen lets you see at a glance the name, firmware version, and total
number of events logged by the NAS. Normally, the Windows monitoring agent
and the drivers send the messages that appear on the LCD screen.
You can instantly configure the NAS and view error events on the LCD screen
without needing to run the Administrative Tool program in Microsoft
Windows. The drivers and monitor agent on the NAS can send system error
event logs and RAID information to the LCD screen. You can set or check
network settings, date and time settings, fan speeds, and CPU temperatures,
and shut down or reboot the NAS using the LCD control panel.
After turning on the NAS, the NAS starts up and the message “OS Booting” is
displayed on the LCD screen. When the startup is complete, the NAS name and
IP address appear on the LCD screen.