Filter
Top Products
45
Main menu
www.gateway.com
Manual
This function gives you the option to manually enter the IP, net mask and
gateway IP address of the LAN2 host.
To configure LAN2 manually:
1 Press the Enter button.
2 Press the Next or Previous button to select Network on the Main menu, then
press the
Enter button.
3 Select LAN 2, then press the Enter button.
4 Select Manual, then press the Enter button.
5 Select IPAddr2, then press the Enter button.
6 Enter the IP address by pressing the Enter button to increase number input.
Press the
Next button to move the cursor to input the remaining numerical
value of the IP address, then press the
Exit button.
(Example) 192.163.001.010
7 Select NetMask2, then press the Enter button.
8 Enter the subnet mask, then press the Exit button to end input.
9 Select GWIP2, then press the Enter button.
10 Enter the gateway IP address, then press the Exit button to end input.
11 Select OK, then press the Enter button. The “Wait host respond” message
appears on the LCD screen. After a few seconds, the “Setting OK” message
appears.