Filter
Top Products
44
Chapter 4: Configuring the NAS
www.gateway.com
10 Enter the gateway IP address, then press the Exit button to end input.
11 Select OK, then press the Enter button. The “Wait host respond” message
appears on the LCD screen. After a few seconds, the “Setting OK” message
appears.
Configuring the LAN2 setting
DHCP
This option lets the NAS automatically obtain IP settings from the LAN2 host.
To configure LAN2 using DHCP:
1 Press the Enter button.
2 Press the Next or Previous button to select Network on the Main menu, then
press the
Enter button.
3 Select LAN 2, then press the Enter button.
4 Select DHCP, then press the Enter button.
5 Select DHCP2 On if you want to get IP address assigned automatically from
the NAS, then press the
Enter button.
- OR -
Select
DHCP2 Off if you want to manually set the IP settings (IP address,
net mask, and gateway IP address), then press the
Enter button.
An asterisk appears next to the DHCP On or DHCP Off option.
6 Select OK, then press the Enter button. The “Wait host respond” message
appears on the LCD screen. After a few seconds, the “Setting OK” message
appears.