Filter
Top Products
60
Chapter 5: System Management
www.gateway.com
Configuring the NAS’s network setting
To configure the NAS’s network setting:
1 On the NAS Servers list, click a server name, then click Network. The Network
Config window opens.
2 Click the LAN host.
3 Click Obtain an IP address automatically to obtain an IP address from a DHCP
server.
- OR -
Click
Use the following IP address to manually enter the NAS’s IP address
and subnet mask. You can also enter the NAS’s gateway IP address and DNS
NAS’s IP address. Both IP address and subnet mask are required during
network setting, but Gateway IP and DNS server address are optional items.
You can still connect to the NAS without the Gateway IP and DNS server
addresses.