Filter
Top Products
110 PMCS Interface Toolkit
PQM (Power Quality Meter)
All six function buttons under the Info box are enabled for the PQM.
The PQM Tabular Data Screen wizard has nine command buttons, described below.
Tab Button Function
Metering Clear Energy Clears the PQM’s energy counters
Reset Device Issues a RESET command to the PQM
Demand Clear Max Demand Values Clears the PQM’s Max Demand values from memory
Clear Frequency Values Clears the PQM's Max Frequency values from memory
I, V Range Clear Current Min/Max Clears the PQM’s Current Min/Max values from memory
Clear Voltage Min/Max Clears the PQM’s Voltage Min/Max values from memory
P Range Clear Power Min/Max Clears the PQM’s Power Min/Max values from memory
Analysis Clear Max THD Values Clears the PQM’s Max THD values from memory
I/O Reset Pulse Counter Resets the PQM’s pulse counter
Table 19. PQM Tabular data screen commands.
See the PQM Instruction Manual (Chapter 5, Actual Values) for information on the
display of data values under different device configurations. Values not configured
for use are displayed as N/A.