GE EPM9450Q Network Card User Manual


 
168 PMCS Interface Toolkit
Auto Reclose
If the breaker is so equipped, the status of and reclose count for up to six Auto
Reclose functions can be displayed, and each recloser may be enabled or disabled.
Click the button next to each ID number to enable/disable the autorecloser.
Contact Output Current States Tab
Universal Relay - Contact Output Current States Tab
The Contact Output Current State tab supports the B30, C30, C60, D60, F30, F35,
F60, G60, L60, L90, M60 and T60 UR devices, and indicates the current state of the
contact outputs installed on the selected relay. Up to 64 contact outputs may be
displayed.
Contact Output Current State
The Current, Voltage, and Detect buttons enable the user to shift the viewing mode of
the contacts displayed.
The contacts are presented as a series of pages. To view the contact outputs, use the
Page arrow keys provided to navigate among the pages. The number of contact
outputs available is determined from the Order Code read from the device, and is
dependent on the number of digital I/O cards installed in the relay. If a contact output
is not available in the connected relay, the associated control button is grayed and
disabled, and the output name field shows "N/A".