GE EPM9450Q Network Card User Manual


 
234 PMCS Interface Toolkit
Configuration
Kilo Volt Inputs
Kilo Amp Input
Mega Watt Input
Phase Reverse Limits
Meter Setup
Limits Set By
Relay 1 / Relay 2
Phase Reversal
Phase Imbalance
Delay On
Delay Off
Decimal Placement
Volts Decimal Placement
This value decides the precision. User can change the values from 1 to 4.
Amps Decimal Placement
This value decides the precision. User can change the values from 1 to 4.
WATT Decimal Placement
VOLTS Full Scale
If kilo volt inputs value is set then Voltage full-scale value is divided by 1000, showing the value in Kilo Volts.
AMPS Full Scale
If kilo Amp inputs value is set then Amps full-scale value is divided by 1000, showing the value in Kilo Amps.
Reset
WATT Hour
VAR Hour
VA Hour
Note: Configured is displayed in green, Enabled in red and Reset in Amber.