Filter
Top Products
153
Voltage
Phasor magnitude and angle for negative, positive and zero sequence voltages.
Voltage values derived from a source wired in a delta configuration will appear as
"N/A".
Protection Control Tab
Universal Relay - Protection Control Tab
The Protection Control tab is supported for the following devices: B30, C30, C60,
D60, F30, F35, F60, G60, L60, L90, M60 and T60. The Protection Control tab
provides the features described below.
Grouped Protection Settings
There are eight identical groups of protection settings in the UR - this tab provides an
enable/disable status indication of selected protection elements, as well as a
pushbutton to change the enable/disable status of those elements in each group.
Function availability is determined by the Order Code read from the device – those
functions that are not available in the connected device will be grayed out and
disabled, as shown below: