Filter
Top Products
182 PMCS Interface Toolkit
Control Tab
369 Relay - Control Tab
This tab provides limited control functionality over Modbus.
Status – indicates the current status of the output relays and general digital inputs.
Preset Values – shows the current value of the indicated field. Note that these values
are only updated when the tab is first displayed – not continuously. To preset a new
value, click the white box containing the value you want to change. The Intouch
Calculator window appears – type in the new value and click OK. The new value is
now displayed in the Control tab, but has not yet been sent to the device. Click the
Set button to store the new value in the device.
Control – These buttons are disabled unless the Serial Communications Control
setpoint in the relay is programmed to "On". These buttons are subject to Intouch
user level security. The security level is set during wizard configuration.
Clear Data – These buttons clear the designated values within the device. All buttons
are subject to Intouch user level security which is set during wizard configuration.