GE EPM9450Q Network Card User Manual


 
80 PMCS Interface Toolkit
EPM 3710 Meter
The large faceplate representation of the EPM 3710 provides the following animated
functions:
Feature Function
Display
Window
Opens the tabular data window specified during wizard
configuration and sets the view to the Monitoring page.
MIN/MAX
Buttons
Open the tabular data window specified during wizard
configuration and set the view to the Setup page.
PHASE
Button
Rotates the left side of the display through eight sets of
instantaneous values, as described in the table below.
FUNCTION
Button
Rotates the right side of the display through 13
accumulated values.
Table 7. EPM 3710 Faceplate animated functions.
The parameters displayed by the PHASE button are listed in the following table.
Display Indication Parameters
A Phase A current and line-to-neutral voltage
B Phase B current and line-to-neutral voltage
C Phase C current and line-to-neutral voltage
* Average current and line-to-neutral voltage
A, Phase A current and A-B line-to-line voltage
B, Phase B current and B-C line-to-line voltage
C, Phase C current and C-A line-to-line voltage
*, Average current line-to-line voltage
The parameters displayed by the FUNCTION button are listed in the following table.
If any of the import or export values are zero, they are not displayed and the next
nonzero value is shown. When any of these parameters are displayed, the AMPS
portion of the display window is used to allow display of the complete value.