GE EPM9450Q Network Card User Manual


 
178 PMCS Interface Toolkit
Alarms Tab
369 Relay - Alarms Tab
The Alarms tab consists of three pages – Status, Trip Data, and Trip Counters. You
can navigate between pages by clicking the buttons located along the lower edge of
the tab display.
Alarm Status
This page displays the current status of the alarm functions within the relay.
If a function is disabled or not programmed, its label appears as dark gray text, and
its associated indicator will be dark gray at all times.
If a function is enabled, its label appears as black text, and its indicator will show the
current status of that function.
Trip Data
This page displays information about the last trip event.
Voltage, power, and power factor values are only indicated if the Metering or
Backspin option is installed and a VT connection has been programmed in the relay.
Line-Neutral voltages are only displayed when the VT is connected in a wye
configuration.
The Hottest Stator RTD field is only shown if a Stator RTD is programmed.
Trip Counters
This page displays information about the accumulated trips experienced by the relay.
Data on this page can be cleared using the Clear Last Trip Data button on the Control
tab.