GE EPM9450Q Network Card User Manual


 
130 PMCS Interface Toolkit
EPM 7500/7600 Meter
The EPM 7500/7600 Tabular Data Screen wizard has several special features. You
can use the Setup screen to change the meter configuration. Values displayed in white
boxes are changeable. Some are changed by clicking on the displayed value, while
others are changed by clicking on the associated scroll button. The Download and
Refresh buttons on the setup screen upload and download all of the setpoints from the
device.
To change setpoints at the device, first press the refresh button to upload current
setpoint values from the device (otherwise the defaults are shown and used for
download). Modify setpoints as desired, then press the download button to send all
setpoints to the unit.
In the following pages, each of the 7500/7600 Meter’s Tabular Data Screen Wizards’
tabs will be displayed and detailed.
Metering Tab
EPM 7500/7600 Meter - Metering Data Screen
The Metering tab displays the following metered values from the EPM 7500/7600.
Vln A, B: n/a when Voltage Mode is DELTA
Vln C: n/a when Voltage Mode is DELTA or SINGLE
Vln Avg: n/a when Voltage Mode is DELTA
Vll AB
Vll BC, CA, and Avg: n/a when Voltage Mode is SINGLE
I A, B, Neutral, and Avg