Filter
Top Products
71
Spectra MicroVersaTrip Trip Unit
The large faceplate representation of the Spectra MicroVersaTrip trip unit provides
the following animated functions:
Click on... Function
Display
Window
Opens the tabular data window specified during wizard
configuration and sets the view to the Normal Monitoring
page.
FUNCTION
Button
Opens the tabular data window specified during wizard
configuration and sets the view to the Setup page.
ENTER Button Opens the tabular data window specified during wizard
configuration and sets the view to the Setup page.
VALUE Button Changes phases in appropriate modes, depending on
whether the device has been configured as Wye or Delta
Phase is indicated by letters in the upper right of the
display; press VALUE to display a different phase.
SELECT
Button
Rotates among six different modes, as shown in the lower
left of the display, with units in the lower right.
Table 2. Spectra MVT Faceplate animated functions.
The metering modes available with the SELECT button are as follows:
Mode Description
AMPS Current, with no label in the units area of the display. Phase shifting in both
Delta and Wye configurations.
VOLTS Voltage, displayed as line-to-line (V
L-L
) for Delta and line-to-neutral (VL-N)
for Wye. Phase shifting in both configurations.
ENGY Energy, displayed in kWh; no phase shifting.
PWR Real power indicated by non-blinking units symbol (kW). Apparent power
indicated by blinking units symbol. Phase shifting in Wye configuration.
FREQ Frequency, displayed in Hz. Phase shifting in both Delta and Wye
configurations.