GE EPM9450Q Network Card User Manual


 
150 PMCS Interface Toolkit
Universal Relay
The Universal Relay devices are a highly-flexible family of power management
devices based on the concept of a backplane and CPU supporting a wide variety of
plug-in modules. These modules provide metering, monitoring, protection and
control functions, and other abilities.
A UR tabular wizard can display between one and eight screens of data – the number
of screens is determined by the user during wizard configuration. There are a total of
Twenty Three screens available, depending on the type of UR device connected. For
example, the C30 device does not support any metering functions, so the metering an
source tabs are not available for this device.
-----------------------------------------------------------------------------------------------------
The UR wizard supports connection to the PMCS Modbus and Ethernet servers and
third party MMS servers. A UCA/MMS check box is provided on the wizard
configuration dialog to correctly set up the Intouch tag names for use with MMS.
Special Note: UCA/MMS support for PMCS 6.11a is removed. Do not
check this
checkbox.
-----------------------------------------------------------------------------------------------------
Note: If WindowViewer is running when the wizard configuration dialog is called up,
a message appears warning that any changes made to the UR wizard configuration
will not take effect until WindowViewer is shut down and restarted. For example, if a
user elects to change the number of tabs configured for a device, the changes will not
be reflected in the runtime environment until WindowViewer is restarted.
In the following pages, each of the Tabular Data Screen Wizards’ tabs will be
displayed and described.