GE pmcs 6.15 Electronic Accessory User Manual


 
Installing Additional Software
Install any additional software, such as Microsoft Excel, at this point in the
procedure. Follow the instruction procedures provided by the manufacturer.
RS485 PMCS Network Interfaces
If you are using an RS485 interface card to connect to the PMCS network, install the
card following the manufacturer’s installation instructions. Be sure to install any
Windows NT drivers provided by the interface-card vendor. Typically, drivers are
installed at Control Panel>Administrative Tools >Computer Management>System
Information> Components>Network>Adapter by following the instructions. You may
be prompted to insert the manufacturer’s disk into the A: drive.
20 Installing the Software CIMPLICITY PMCS Read-This-Book-First