Filter
Top Products
2 - 6 Quick Check® SV Series User’s Guide
System Displays
Five LEDs are included on the SV Series back panel.
Power/Sync LED
This LED is illuminated green whenever power is applied to the SV Series. Upon
receipt of any sync input (hardware or serial communications), the LED blinks
yellow for approximately 100 milliseconds.
Calibration LED
This yellow LED indicates calibration status. Please refer to "Calibration" on
page 5-8 for details.
Read LED
This green LED is illuminated whenever a bar code is being fully decoded.
Indicator LEDs 1 and 2
The two green indicator LEDs are user programmable exactly like the five output
ports. Their functions are intended for use as indicators for specific analysis
results.
A common example is programming LED 1 to illuminate in latch mode whenever
a symbol quality error is detected, while programming LED 2 to illuminate in latch
mode whenever a No Read error is detected.