Filter
Top Products
6 - 46 Quick Check® SV Series User’s Guide
11. Error conditions available are:
a. Partial Read (Programmable, ( ~Lp#, LQ#)
b. % decode (Programmable, ~LD##)
c. Bad Quiet Zone: < 10X (~PB816xxx100)
d. ISO Defects grade (Programmable, ~PB806xxx000)
e. ISO Decodability grade (Programmable, ~PB802xxx100)
f. Symbol Contrast grade (Programmable, ~PB804xxx100)
g. Overall ISO Grade (Programmable, ~LAxx)
h. No Read (if sync is received)
i. Number of codes per sync programmable (~LN##, ~LZ##)
j. X dimension Range (Programmable ~PB811xxxyyy)
k. Ratio (Programmable ~PB815xxx000)
l. Symbology Mod Check data error
m. I 2 of 5 optional Mod 10 Check Digit data error (if enabled)
n. Data Match Error (~BC)
o. Increment or Decrement data error (~Br)
LED Operation
1. LED1 will turn on when Ports 1 and 2 are active due to ISO, Symbol Con-
trast, X dimension, ratio, mod check or quiet zone error conditions.
2. LED1 will flash when Ports 1 and 2 are active due to a data increment or
decrement error condition.
3. LED2 will turn on when Ports 1 and 2 are active due to a partial, % decode or
no read error conditions.
4. LED2 will flash when Ports 1 and 2 are active due to a Data Match error
condition.
5. Flashing indication will override a solid on indication if both types of error
conditions occur.
Note: Both LEDs can be on in cases where multiple bar codes are analyzed in
a sync period.