Filter
Top Products
Quick Check® SV Series User’s Guide 6 - 13
~LI#
Include the specified symbology for a label
‘#’ identifies the included symbology:
~LL
Report the excluded symbologies and the included symbologies specified for all the
defined bar codes.
Hexadecimal value ‘4’ - identifies the beginning of the data packet response
The mode for each symbology is reported in a character string, which terminated
with either ‘IN’ (for included) or ‘EX’ (for excluded) followed by a ‘\r’ character
(carriage return) and a ‘\n’ character (a line feed). See the example below. The
next two columns indicate statuses of the ~LM and ~LN commands respectively.
(The ~LM command is not used in normal operation.)
Hexadecimal value ‘5’ - identifies the end of the data packet response
L - the last character of the sent command string
Example return using ScanView:
1UPC/EAN
2 Code 39
3 Code 128
4 Interleaved 2 of 5
5 Code 93
6 Codabar
1 UPC/EAN- IN
2 C39- IN
3 C128- IN
4 CITF- IN
5 C93- IN
6CBAR- IN
min chars: 032
number bc: 099
L