Filter
Top Products
Chapter 3 • Creating Synchronization Links
82
4 Set the e-mail notification settings:
➤ In the E-mail address box, type an e-mail address to instruct the
Synchronizer server to send e-mail notifications for failed link task runs
(and also for task runs that pass with errors if you select the check box
below). Only one e-mail address can be specified for each link. The e-mail
notifications are sent according to the e-mail settings defined for the
Synchronizer server.
➤ Select the Send notification when task passes with errors check box to
instruct the Synchronizer to send an e-mail notification to the e-mail
address listed above when a synchronization task passes with errors.
Setting Adapter Parameters
By default, the Synchronizer supports specific connectivity parameters for
each adapter type. An adapter is the endpoint application to which the
Synchronizer connects. You can view these connectivity parameters, and the
values defined for them, in the Connectivity tab.
If an adapter requires additional parameters, for example, because the
adapter was modified, or you are working with an adapter other than the
defaults supported by the Synchronizer, these additional parameters are
displayed in the Advanced tab.
To define the value for an adapter parameter:
Click the Value cell for the adapter parameter you want to define and enter
the parameter value.