Filter
Top Products
Configuration Options
C-13
3162-A2-GB20-40
August 2000
Table C-5. Sync Data Port Assignment Options (2 of 3)
Sync Data Port Assignments
Port Data Rate: 384
64 128 192 256 320 384 448 512 576 640 704 768 832
896 960 1024 1088 1152 1216 1280 1344 1408 1472 1536
OR
56 112 168 224 280 336 392 448 504 560 616 672 728
784 840 896 952 1008 1064 1120 1176 1232 1288 1344 Prev
Designates the data rate for the port. Available selections depend on the current base
rate configured for the port. The factory default for Nx64 is 384 kbps, and Nx56 is
336 kbps.
NOTES: – This selection is not available if the individual channel allocation method
(Channel) is selected using the Assign By field.
– Changing this selection from one rate to another deallocates all DS0
channels assigned to either the network interface or the DTE
Drop/Insert (DSX-1) interface.
– When you enable EDL, 8 kbps of the total bandwidth allocated for this
port is not available to the synchronous data port. For example, if you
select 256 kbps and EDL is enabled, only 248 kbps are available.
– When you enable EDL on a synchronous data port and the clock source
is set to that synchronous data port, the external device must provide a
clock of 8 kbps less than the expected data port rate. For example, if
you select 64 kbps, the external clock source must supply a 56 kbps
clock signal.
Sync Data Port Assignments
Assign To: Port
Portn: Pn
Allows you to assign this port to another port.
Possible values are:
Value
Meaning
Available This DS0 channel is not allocated. You can modify this value on this screen.
Assigned This DS0 channel is allocated to the network interface or the DTE
Drop/Insert (DSX-1) interface. You cannot modify this value on this screen.
Pn This DS0 channel is allocated to Port n, where n is 1 or 2. You can modify this
value on this screen.