Filter
Top Products
Configuration
4-14
3162-A2-GB20-40
August 2000
Allocating DS0 Channels from the DTE Drop/Insert Interface to the
Network Interface
"
Procedure
To allocate DS0 channels from the DTE Drop/Insert (DSX-1) interface to the
network interface:
1. From the Main Menu screen, select Configuration.
The Load Configuration From screen appears.
2. From the Load Configuration From screen, select Current.
The Configuration Edit/Display screen appears.
3. From the Configuration Edit/Display screen, select Cross Connect.
The Cross Connect screen appears.
4. From the Cross Connect screen, select DTE To Network Assignments.
The DTE to Network Assignments screen appears (Figure 4-8).
5. Assign the DS0 channels from the DTE Drop/Insert (DSX-1) interface to the
network interface. In the example shown in Figure 4-7, the DTE Drop/Insert
(DSX-1) DS0 channel 01 is assigned to the network DS0 channel 01.
6. Select S
ave to store these settings in nonvolatile memory.
main/config/cross_connect/dte
Customer ID: Node A Model: 3162
Slot: xx
DTE (DSX-1) TO NETWORK ASSIGNMENTS
N01 N02 N03 N04 N05 N06 N07 N08
DTE01
Available Available Available Available Available Available Available
N09 N10 N11 N12 N13 N14 N15 N16
Available
Available Available Available Available Assigned Assigned Assigned
N17 N18 N19 N20 N21 N22 N23 N24
Available
Assigned Assigned Assigned Assigned Assigned Assigned Available
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
S
ave NetChan DTEChan PtAssign
DTE to
Network
Assignment
Figure 4-8. Making DTE to Network Assignments