Filter
Top Products
Configuration
4-19
3162-A2-GB20-40
August 2000
Setting a Password
In addition to establishing access security on a port (refer to the previous section,
Establishing Access Security on the COM Port), the password itself is set.
Unless you specify otherwise, the password is null.
" Procedure
To set a password:
1. From the Main Menu screen, select Control.
2. From the Control screen, select Administer Password.
The Password Entry screen (Figure 4-10) is used to add a new password or
modify an existing password.
3. Enter a new password in the Password field.
The password may be 1 to 8 characters long and may contain the characters
0 through 9, a through z, and/or A through Z.
4. Use the Re-Enter Password field to verify the new password.
5. Select S
ave.
Once a password is saved, the Login Records Saved message appears in
the last row of the screen.
main/control/admin_password
Customer ID: Node A Model: 3162
Slot: xx
PASSWORD ENTRY
Password:
Re-Enter Password:
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
S
ave
Enter New
Password
Re-Enter
Password
Save
Password
Figure 4-10. Setting a Password