Filter
Top Products
Configuration
4-13
3162-A2-GB20-40
August 2000
" Procedure
To display the DS0 channel allocation:
1. From the Main Menu screen, select Configuration.
2. From the Load Configuration From screen, select Current.
3. From the Configuration Edit/Display screen, select Cross Connect.
4. From the Cross Connect screen, select DTE To Network Assignments.
The DTE to Network Assignments screen appears (Figure 4-7).
5. To view specific port assignments on the Network Channel Display screen,
select N
etChan at the bottom of the DTE to Network Assignments screen.
main/config/cross_connect/dte
Customer ID: Node A Model: 3162
Slot: xx
DTE (DSX-1) TO NETWORK ASSIGNMENTS
N01 N02 N03 N04 N05 N06 N07 N08
DTE01
DTE02 DTE03 DTE04 DTE05 Available Available Available
N09 N10 N11 N12 N13 N14 N15 N16
DTE09
DTE10 DTE11 DTE12 DTE15 Assigned Assigned Assigned
N17 N18 N19 N20 N21 N22 N23 N24
Available
Assigned Assigned Assigned Assigned Assigned Assigned Available
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
S
ave NetChan DTEChan PtAssign
NetChan
Selection
Figure 4-7. Example of DTE Drop/Insert Interface Worksheet