Filter
Top Products
EN
Control Panel Menus B-19
CFG TCP/IP=NO NO
YES
NO
: The TCP/IP Menu is not accessible.
YES
: The TCP/IP Menu appears. In the TCP/IP
Menu, you can specify
BOOTP=YES
for TCP/IP
parameters to be automatically loaded from a
bootp or DHCP server when the printer is
turned on. If you specify
BOOTP=NO
, you can
manually set selected TCP/IP parameters from
the control panel. You can manually set each
byte of the IP address (IP), Subnet Mask (SM),
Syslog Server (LG), and Default Gateway
(GW). Also, you can manually set the Timeout
time period.
Note
If no IP address is assigned within the first 5
minutes, the HP JetDirect print server card will
assume a default IP address of 192.0.0.192.
CFG ETALK=NO NO
YES
NO
: The EtherTalk Menu is not accessible.
YES
: The EtherTalk Menu appears. In the
EtherTalk Menu you can set the AppleTalk
phase parameter (
ETALK PHASE=1 or 2
) for
your network.
EIO Menu (Continued)
Item Values Explanation