Filter
Top Products
0x40172b27: (b2) P3lc_gr gr=40
0x40172b29: (61) R3body rlen=33
0x40172b2b: (81) B1label_state label=1
0x40172b2c: (c0) B2epilogue t=44
0x40172b2e: (00) R1prologue rlen=0
0x40172b2f: (00) R1prologue rlen=0
14.13.4 Printing CFM and PFS registers
On Integrity systems, HP WDB prints Current Frame Marker (CFM) and Previous
Frame State (PFS) ar64 registers in two different formats:
• raw values
• special formats identifying the size of rotating registers, frame and locals.
For example,
ar64: 0xc00000000000050c (sor:0, sol:10, sof:12)
cfm: 0x800000000000450a (sor:1, sol:10, sof:10)
14.14 Command to Search for a Pattern in the Memory Address Space
The HP WDB find command searches for a pattern in the given memory address
range for both live and corefile debugging. Following is the syntax for the find
command:
find [/size-char] [/max-count] start-address, end-address, expr1
[, expr2 ...]
find [/size-char] [/max-count] start-address, +length, expr1 [,
expr2 ...]
where:
/size-char Specifies the size of the pattern. It can be b, h, w, or g for
8-, 16-, 32-, 64-bit values, respectively. It is applicable only
for hexadecimal patterns.
If /size-char is not specified, the size is obtained from
the type of the expression in the current programming
language.
This is an optional parameter.
/max-count
Specifies the maximum number of matching patterns to
be displayed. This is an optional parameter.
start-address
Specifies the start address in the given memory address
range. This parameter is mandatory.
end-address
Specifies the end address in the given memory address
range. This parameter is mandatory.
196 HP-UX Configuration-Specific Information