Filter
Top Products
The following example shows the disassembly of a range of addresses of HP PA-RISC
2.0 code:
((gdb)) disas 0x32c4 0x32e4
Dump of assembler code from 0x32c4 to 0x32e4:
0x32c4 <main+204>: addil 0,dp
0x32c8 <main+208>: ldw 0x22c(sr0,r1),r26
0x32cc <main+212>: ldil 0x3000,r31
0x32d0 <main+216>: ble 0x3f8(sr4,r31)
0x32d4 <main+220>: ldo 0(r31),rp
0x32d8 <main+224>: addil -0x800,dp
0x32dc <main+228>: ldo 0x588(r1),r26
0x32e0 <main+232>: ldil 0x3000,r31
End of assembler dump.
Some architectures have more than one commonly-used set of instruction mnemonics
or other syntax.
set disassembly-flavor
instruction-set
Select the instruction set to use when
disassembling the program via the
disassemble or x/i commands.
Currently this command is only defined for the
Intel x86 family. You can set instruction-set
to either intel or att. The default is att, the
AT&T flavor used by default by Unix assemblers
for x86-based targets.
7.4 Source and machine code 81