Filter
Top Products
(gdb)
-data-list-register-names
^done,register-names=["r0","r1","r2","r3","r4","r5","r6","r7",
"r8","r9","r10","r11","r12","r13","r14","r15","r16","r17","r18",
"r19","r20","r21","r22","r23","r24","r25","r26","r27","r28","r29",
"r30","r31","f0","f1","f2","f3","f4","f5","f6","f7","f8","f9",
"f10","f11","f12","f13","f14","f15","f16","f17","f18","f19","f20",
"f21","f22","f23","f24","f25","f26","f27","f28","f29","f30","f31",
"", "pc","ps","cr","lr","ctr","xer"]
(gdb)
-data-list-register-names 1 2 3
^done,register-names=["r1","r2","r3"]
(gdb)
The -data-list-register-values command
Synopsis
-data-list-register-values fmt [ ( regno )*]
Display the registers contents. fmt is the format according to which the registers'
contents are to be returned, followed by an optional list of numbers specifying the
registers to display. A missing list of numbers indicates that the contents of all the
registers must be returned.
Allowed formats for fmt are:
x
Hexadecimal
o
Octal
t
Binary
d
Decimal
r
Raw
N
Natural
GDB command
The corresponding GDB commands are 'info reg', 'info all-reg', and (in gdbtk)
'gdb_fetch_registers'.
Example
For a PPC MBX board (note: line breaks are for readability only, they do not appear in
the actual output):
(gdb)
-data-list-register-values r 64 65
^done,register-values=[{number="64",value="0xfe00a300"},
{number="65",value="0x00029002"}]
(gdb)
-data-list-register-values x
324 The GDB/MI Interface