Filter
Top Products
Manually configure IPv4 TCP/IP parameters from the control panel
In addition to using the Embedded Web Server, you can also use the control-panel menus to set an
IPv4 address, subnet mask, and default gateway.
1. At the product control panel, touch the Administration button.
2. Touch the Network Settings menu to open it.
3. Touch the Jetdirect Menu option.
4. Touch the TCP/IP option.
5. Touch the IPV4 Settings option
6. Touch the Config Method option.
7. Touch the Manual option.
8. Touch the option you wish to manually set and follow the onscreen instructions to manually
change the option setting.
9. Touch the Save button to save your changes.
Configure the product to use the network 23