Filter
Top Products
Manually configure IPv6 TCP/IP parameters from the control panel
In addition to using the Embedded Web Server, you can also use the control-panel menus to set an
IPv6 address.
1. At the product control panel, touch the Administration button.
2. Touch the Network Settings menu to open it.
3. Touch the Jetdirect Menu option.
4. Touch the TCP/IP option.
5. Touch the IPV6 Settings option.
6. Touch the Address option.
7. Touch the Manual Settings option.
8. Touch the Enable option.
9. Touch the On option, and then touch the Save button.
10. Touch the Address option, and then touch the data entry field.
11. Use the keyboard to enter the address, and then touch the Save button.
24 Chapter 4 Configure the product