Filter
Top Products
Install the hardware integration pocket
Use the included hardware integration pocket (packaged with the output tray) with a separately-
purchaseable HP accessory such as a secure card reader to provide secure access to your product.
To install the hardware integration pocket, follow these steps.
1. Open the hatch.
2. Using a T-8 Torx screwdriver (not included), turn the hardware integration pocket panel retaining
screw counterclockwise to loosen and remove the screw, rotate the panel up and toward you as
shown, and then remove the panel.
3. Gently pull the hardware integration pocket connector up and out of its recessed location.
60 Chapter 7 Manage and maintain the product