Filter
Top Products
Advanced Configuration and Management Guide
• There is no need to include a virtual interface within VLAN 4.
• The backbone VLAN between 9304 B and 9304 C must be the same at both ends and requires a new VLAN
ID. The VLAN ID for this port-based VLAN is VLAN 7.
Configuration for 9304 B
Enter the following commands to configure 9304 B.
HP9300> en
No password has been assigned yet...
HP9300# config t
HP9300(config)# hostname HP9300-B
HP9300-B(config)# router ospf
HP9300-B(config-ospf-router)# area 0.0.0.0 normal
HP9300-B(config-ospf-router)# router ipx
HP9300-B(config-ospf-router)# vlan 2 name IP-Subnet_1.1.6.0/24
HP9300-B(config-vlan-2)# untag e1/1 to 1/4
HP9300-B(config-vlan-2)# no spanning-tree
HP9300-B(config-vlan-2)# router-interface ve1
HP9300-B(config-vlan-2)# other-proto name block-other-protocols
HP9300-B(config-vlan-other-proto)# no dynamic
HP9300-B(config-vlan-other-proto)# exclude e1/1 to 1/4
HP9300-B(config-vlan-other-proto)# int ve1
HP9300-B(config-vif-1)# ip addr 1.1.6.1/24
HP9300-B(config-vif-1)# ip ospf area 0.0.0.0
HP9300-B(config-vif-1)# vlan 8 name IPX_Network6
HP9300-B(config-vlan-8)# untag e 1/5 to 1/8
HP9300-B(config-vlan-8)# no span
HP9300-B(config-vlan-8)# router-int ve2
HP9300-B(config-vlan-8)# other-proto name block-other-protocols
HP9300-B(config-vlan-other-proto)# no dynamic
HP9300-B(config-vlan-other-proto)# exclude e1/5 to 1/8
HP9300-B(config-vlan-other-proto)# int ve2
HP9300-B(config-vif-2)# ipx net 6 ethernet_802.3
HP9300-B(config-vif-2)# vlan 3 name IP_Sub_&_IPX_Net_VLAN
HP9300-B(config-vlan-3)# untag e2/1 to 2/8
HP9300-B(config-vlan-3)# no spanning-tree
HP9300-B(config-vlan-3)# ip-subnet 1.1.7.0/24
HP9300-B(config-vlan-ip-subnet)# static e2/1 to 2/4
HP9300-B(config-vlan-ip-subnet)# router-interface ve3
HP9300-B(config-vlan-ip-subnet)# ipx-network 7 ethernet_802.3
16 - 26