Filter
Top Products
Factory-Installed Options
◆
300 dpi printhead (120552)
◆
Internal TwinAx/CoAx Protocol Converter (117532)
also Service-installable)
◆
Internal Ethernet Print Server supports TCP/IP (11753104)
◆
Peel mode with on-demand sensor
◆
Tear Bar
◆
Metal Cover
◆
Knife-ready (order 926 Knife separately)
Ethernet Information
Monarch® offers internal and external Ethernet connectivity
solutions. These solutions make it easy to set up, manage, and
monitor a Monarch 9850 printer linked to an Ethernet connection.
The print server provides multiprotocol capabilities for users with
Windows® 95/98/2000 or Windows NT®, TCP/IP, and NetWare®.
Software is available on Monarch’s Web site (www.monarch.com)
to configure the print server or you can order part number
TC9840ENCD for the MonarchNet Utilities compact disc. It can
also be configured using HP Jet Admin or HP Web JetAdmin
software.
Configuration information prints automatically if the Ethernet print
server senses a hardware error. To print configuration information
on demand, press the Test button on the side of the external
Ethernet print server unit or use the configuration utility provided
for your network operating system. The configuration label prints
in MPCL format.
The configuration label is best displayed
using 4" wide by 6" long labels. If the label is
too small, some information may print outside
the label edges.
B-2 Accessories & Options