Filter
Top Products
Setting Contrast
The print contrast controls the darkness of the printing on your
supply. The range is 390 to +156 and the default is 0. You may
need to increase the print contrast for linerless supplies. Having
the correct print contrast setting is important because it affects
how well your bar codes scan and how long your printhead lasts.
You can use a verifier to check the bar code print quality.
If you set the contrast by turning the knob on
the back of the printer, this contrast setting is
added to it.
1. From the Main Menu, press l or r until you see
MAIN MENU
l Setup r
2. Press Enter/Pause. You will be at the Setup menu. Press l
or r until you see
SETUP
l Contrast r
3. Press Enter/Pause. You will see the current setting, for
example:
Enter contrast
[-390/156]: +0
SUPPLY CONTRAST DEFAULTS
PORT
SETTINGS
MAIN MENU
CANCEL
ALL
PRINT
MODE
REPEAT
BATCH
SETUP DIAG.
BATCH
ENTRY
FORMAT
OPTIONS
Setting Supply Options 4-13