Filter
Top Products
3. Press l or r to see the other options. After you display the
option you want, press Enter/Pause. Press Escape/Clear
twice to exit to the Main menu.
Speed
You can change the print speed for bar codes or graphics. If you
select "default" for speed, formats with serial bar codes
automatically print at 2.5IPS and formats with parallel bar codes
print at 6.0 ips. 10 ips printing is only available using thermal
direct labels in continuous mode.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press l or r until you see
SUPPLY
l Speed r
2. Press Enter/Pause to set the speed option. You will see the
current setting, for example:
SPEED
l Default
3. Press l or r to see the other options. After you display the
option you want, press Enter/Pause. Press Escape/Clear
twice to exit to the Main menu.
For additional high speed printing information,
see Chapter 7, "Printing."
4-10 Setting Supply Options