Filter
Top Products
Print Speed: 2.5 ips (64 mm) default for all serial bar
codes, 4.0 ips (102 mm), 6.0 ips (152 mm)
default for parallel bar codes, 8.0 ips (203
mm), and 10.0 ips (254 mm)
See Chapter 7, "Printing" for special
considerations when printing at speeds
greater than 6.0 ips.
Printing Method: Thermal Transfer (ribbon) or Thermal Direct
Maximum Print
Area
4.0 inches x 16.0 inches (102 mm x 406 mm)
with 203 dpi
4.0 inches x 13.0 inches (102 mm x 3330 mm)
with 300 dpi
Supplies
For high temperature or high humidity environments, contact
Monarch for supply recommendations. Continuous (non-indexed)
supply does not have perforations or black marks and must be
used in continuous mode. We recommend using continuous
supply with a tear bar or the optional knife. If you purchased the
optional knife, you cannot use the tear bar. Aperture supplies are
tags or labels with holes (or openings) in them. The supply is
sensed using the holes. The holes can be only on the edge or in
the center of the supply.
Supply Types: Thermal Transfer or Direct
Supply Widths: .75 inches (19 mm) minimum
4.00 inches (102 mm) maximum
Supply Lengths: .32 inch (8 mm) minimum
17.5 inches (445 mm) maximum
A-2 Specifications