Filter
Top Products
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press l or r until you see
SUPPLY
l Margin Pos r
2. Press Enter/Pause. You will see the current setting, for
example:
Enter margin pos
[-99/99]: +0
3. Press l or r to change the margin position. Pressing l
decreases the value (moves the image toward the left side of
the supply); r increases it (moves the image toward the right
side of the supply).
4. Press Enter/Pause when the number you need appears.
Press Escape/Clear twice to exit to the Main menu.
Cut Position
This function adjusts where the tag is cut. The printer adjusts the
cut position according to the black marks on the supply. You may
need to adjust for aperature supplies. Increase to move the cut
up; decrease to move the cut down.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press l or r until you see
SUPPLY
l Cut Pos r
4-8 Setting Supply Options