Filter
Top Products
The parallel communication values are listed in the table below.
Option Choices Default
Port External/Internal External
Mode Compatible/IEEE-1284 Compatible
(Centronics mode)
To change the setting, from the Main Menu select Setup, Port
Settings, then Parallel Comm. Then, follow these steps:
1. Press l or r until you see
PARALLEL COMM
Port r
2. Press Enter/Pause. You will see the current setting, for
example:
PORT
External r
3. Press Enter/Pause to select the external port. You are now
ready to communicate using an external connection through a
cable or external device, such as the external Ethernet print
server.
5-6 Communication Values