Filter
Top Products
To exit an option without changing the setting, press
Escape/Clear.
Ribbon
You have to tell the printer if your supplies require a ribbon. To
change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press l or r until you see
SUPPLY
Ribbon r
2. Press Enter/Pause to set the ribbon option. You will see the
current setting, for example:
RIBBON
l Yes r
3. Press l or r to see the other options. After you display the
option you want, press Enter/Pause. Press Escape/Clear
twice to exit to the Main menu.
If you set the Ribbon option to Yes, install a
ribbon before printing.
If you want to use a high energy ribbon,
select high energy for the ribbon every time
the printer is turned on.
4-2 Setting Supply Options