Filter
Top Products
Troubleshooting
Selftest Failures
86
error
7D0A HPMC_BAD_ADDR Address did not map
to bank
7F00 MEM_FRU_ID D3 = SIMM pair
7FFF CATASTROPHIC_MEM_ERR
Code Name Meaning
802B IO_BUS_OVERLAP Most likely graph-
ics on core and carrier
803D TOO_MANY_GRAPHICS Graphics cards
space overlap
80F3 ERR_READING_IODC_BYTES PDC_IODC failed to
retrieve header info
80F4 ERR_READING_EINIT PDC_IODC failed to
return entry_init
80F5 ERR_EXEC_EINIT Error executing
entry_init
80F6 ERR_READING_EIO PDC_IODC failed to
return entry_io
80F7 ERR_ENTRY_IO_ERR Error executing
ENTRY_IO
80F8 INVALID_DEVICE_CLASS must be sequential,
random or tftp
80F9 ERR_READIN_ETEST PDC_IODC failed to
return entry_test
80FA ERR_EXEC_ETEST Error executing
ENTRY_TEST
80FC INVALID_DEVICE Probably internal
PDC structure error
8400 LASI_TEST Begin LASI tests
8404 LASI_INIT_RS232 8404 LASI_TEST_RS232
8404 LASI_FLT_RS232 Failed LASI RS232
test
8405 LASI_INIT_SCSI 8405 LASI_TEST_SCSI
8405 LASI_FLT_SCSI Failed LASI SCSI
test
8406 LASI_INIT_LAN 8406 LASI_TEST_LAN
8406 LASI_FLT_LAN Failed LASI LAN test
8407 LASI_INIT_KYBD 8407 LASI_TEST_KYBD
8407 LASI_FLT_KYBD Failed LASI Key-
board test
84FF FLT_NO_LASI No LASI present
8500 WAX_EISA_MAP_TEST 8500 WAX_EISA_MAP_ERR
8501 WAX_EISA_ID_TEST 8501 WAX_EISA_ID_ERR
8FFF LATE_ST_FLT Late Monarch selft-
est failure (I/O)
For the following section of PCI-related chassis codes:
The “0” (in codes of the form 8C0y) may be re-
placed by the FRU slot number where appropriate.
Code Name Meaning
8C05 PCI_PATH_ERR PATH error - wrong
HW ?
8C06 PCI_BIST_TEST Start exec dev’s
BIST test
8C07 PCI_BIST_ERR Dev’s BIST test
failed
8C08 PCI_ALLOC_ERR Resource allocation
error
8C09 PCI_MEM_MANAGER_ERR Memory manager error
8C0A PCI_MEM_TYPE_ERR Dev wanted mem be-
low 1Mb
8C0B PCI_MAX_BUS_EXCEEDED > max allowed bus
depth
8C0C PCI_DEV_NOT_CONFIGURED Dev not configured
8C0D PDC_SYS_MAP_OVERFLOW PDC_SYS_MAP is full
(during PCI bus walk)
8C0E SYS_PCI_MAP_OVERFLOW SYS_PCI_MAP is full
8C0F PCI_INT_KLUDGE_WARN RavenU+ LP intrupt