Filter
Top Products
Boot Console Interface Model C100/110
Displaying and Setting Secure Mode
202
Displaying and Setting Secure Mode
The SECure flag is a variable stored in non-volatile
memory. (Non-volatile memory retains its contents
even after power is turned off.) If you reset this flag to
a new value, the change takes effect the next time you
reboot the workstation.
When the SECure flag is set to on, autoboot and
autosearch are enabled and cannot be stopped. The
system boots from the default boot paths regardless of
user intervention.
To display the current setting for the SECure flag,
enter the following command:
secure
To set the SECure flag on or off, enter one of the fol-
lowing:
secure on
secure off