Filter
Top Products
Field Replaceable Units
FRU Removal and Replacement
131
Installing Cache Modules
Before installing cache modules, remove the Main
Tray Assembly from the system unit.
You must install two cache modules.
Perform the following steps to install cache
modules:
1 Locate the cache connectors on the CPU board, as shown
in the figure in the previous section.
2 To install a cache module, close the ejector tabs on each
side of the cache connector. This lowers the force needed
to seat the cache board.
Line the cache module up with the guides, as shown in
Figure 44. Make sure that the notched end of the cache
module is to the left, as shown in Figure 44.
Figure 44 Installing Cache Modules