Filter
Top Products
Field Replaceable Units
FRU Removal and Replacement
117
Storage Tray Assembly
Perform the following steps to remove the storage tray
assembly from the system unit:
1 Remove the storage tray retaining screw, as shown in
Figure 30.
Figure 30 Removing the Storage Tray Assembly
2 If installed, remove any locking device from the security
loop on the rear of the system unit.
3 Place your fingertips in the finger groove on the bottom
of the storage tray bezel and pull straight, as shown in
Figure 30.
4 Slide the storage tray completely out of the system unit.
Retaining Screw