Filter
Top Products
Creating Labels Using Internal Batch Software
32 DMX 400/430 Operator’s Manual
F5 and ALT-S: Calls up the system maintenance screen. All system
maintenance functions are described in Section 3.5.
F6 and ALT-P: While in the far left position of the
create/modify label screen or the sample: position of
the print label screen, press ALT-P to bring up the print
parameters window. It will look like this:
PRINT ADJUSTMENTS
HEAT FACTOR: 10
PRINT SPEED: G
SLEW SPEED: K
DOT PATTERN: 1 X 1
LABEL ADVANCE: 02.20
FORM EDGE OFFSET: 02.20
ROW OFFSET: 00.00
COLUMN OFFSET: 00.00
COUNT BY: 01
MAX. LABEL WIDTH: 04.10
MAX. LABEL LENGTH: 12.00
CONTINUOUS FORMS: NO
ACTIVE BUFFERS (1/2) 01
CUT BY (# PER CUT): 0001
SENSOR TYPE: EDGE
Figure 3-1 ALT-P Screen
Use the arrow keys to move from one position to the next. Key
in any values that need to be changed. Press the Esc key to exit
the window. A description of each print parameter along with
default values and valid settings are listed in Table 3-2.