Filter
Top Products
Creating Labels Using Internal Batch Software
38 DMX 400/430 Operator’s Manual
3. Enter an alphanumeric name of up to 16 characters for this
label, followed by the return key. The message "New Label
Format?" appears, answer Y or N. If yes, the cursor moves to
the ROT position. If the cursor does not move past the new
label format position, the memory module 's write protect switch
is ‘on’; turn it ‘off’ to continue.
4. The Printer can print fonts, bar codes, and graphics at 0, 90,
180, or 270 degree rotations. Valid responses to the ROT
prompt include:
1 = 0 degrees
2 = 90 degrees
3 = 180 degrees
4 = 270 degrees
5. In the FNT position, enter the type of font you want to print.
This can be an alphanumeric font or a bar code. Enter one of the
following:
• An alphanumeric font type, followed by the return key.
Choices are 0 through 8. See Appendix C for examples
of each available font type and for the actual printed size
of the various fonts using different multiplication
factors.
• An alphanumeric CG Triumvirate font type, followed
by the return key; the only choice is 9, (see Appendix C
for examples of each available font type). The point size
is selected in the bar code height field. Values are 001
through 010.